Q: How to operate the engraving machine?

Q: How to operate the engraving machine?

Release date :2018-06-19 Browse times:1927


Before using the CNC engraving machine, first make sure all the connections between the machine and the computer are normal, then turn on the machine power and the computer power. After the system starts up, enter the NCStudio CNC system.

2. Select the "Back to Machine Origin" menu after opening the control system. The machine will automatically return to the machine origin and correct the system coordinate system. In some cases, after the normal shutdown of the previous time, the power is turned back on and the previous operation is continued, and the user does not have to perform a mechanical reset operation. When the NCStudio system exits normally, the current coordinate information is saved. In addition, if the user confirms that the current location is correct, this operation may not be performed.

3. Before processing, the user usually loads the required machining program. Otherwise, some functions related to automatic machining are invalid. Select "Open (F) | Open (O) ..." menu, the Windows standard file operation dialog will pop up, from which you can select the drive, path and file name where the file will be opened. After clicking the "Open" button, the machining program is loaded into the system.

4. Determine the origin of the workpiece, manually walk the X and Y directions of the stone engraving machine to the desired origin position on the workpiece, select the "Set current point as the workpiece origin" menu, or put the coordinates of the current position in the coordinate window. Cleared so that when the machining program is executed, the current position is used as the starting point for machining.